Manufacturing & Maintenance

Within Manufacturing & Maintenance you are part of production activities where you maintain high quality standards.

Lediga tjänster

Nedan hittar du alla våra lediga tjänster just nu. Om du hittar något som passar, skicka in en ansökan idag!

Jobbtitel
Plats
Ansök senast
Plats: FRA - Carquefou Cedex
Ansök senast: 2024-03-28

Translate the Job Ad Template to local language if needed.

Jobbtitel: Process Engineer
On-site
Plats: VIE - Ho Chi Minh City
Ansök senast: 2024-03-28

JOB SUMMARY

The Process Engineer follows lean manufacturing techniques to provide engineering support and develop robust manufacturing processes. Has a primary role in the engineering of new, modified and/or existing manufacturing operations.

DUTIES, Responsibilities, And Authorities

  • To ensure that all process engineering activities are handled professionally and effectively.
  • Ensure the coordinated support of all daily, weekly, process and administrative checks. To ensure engineering activities and support day to day operations in the manufacturing area/s.
  • Understand equipment use and limitations, work with Engineering and Maintenance to improve.

Coordinate the Identification of poor production mold, raise awareness to production support, ensure that investigations are thorough and mold demands are submitted for replacements/preparing.

  • Coordinate with the Maintenance and Engineering Manager on any EH&S, or equipment issues.
  • To ensure all processes are aligned with an emphasis on safety, quality, delivery and cost.
  • To be a key team member for implementing and sustaining lean manufacturing techniques in project fulfilment and Kaizen activities.
  • Assist in all quality deviations identified, initiate immediate action plans, monitor output, trial and implement initial and or long-term fixes and changes.
  • Provide support for cross functional teams on customer returns to investigate, trial and implement initial and or long-term fixes and changes. Uses standard problem-solving tools, e.g., 8D, 5 Whys, Fishbone.
  • Coordinate and support New Product Introduction, to assist in the trialing of sample production and process evaluation.
  • Analyses new product specifications and translates these into manufacturing processes to achieve expected quality levels and establish the reliability of the finished product.
  • Responsible for the completion of the design and development of optimal, cost-effective, and reliable manufacturing processes.
  • Performs DOEs, and participates in the development of control plans, Process Maps, and PFMEA documentation.
  • Develops and documents standard operating procedures (SOP) and trains manufacturing personnel on SOPs

Continuation of DUTIES AND RESPONSIBILITIES

  • Work closely with cross functional teams, in all areas on corrective actions and efficiency benefits.
  • Use 6 Sigma methodology and be part of continuous improvement and change management projects.
  • Provides mentorship to others through experiences and education as opportunities arise.
  • Liaise with the Operations Manager and Engineering in support of all work areas as necessary.
  • Ensure safety performance is adequately communicated.

MINIMUM QUALIFICATION REQUIREMENTS Education

  • Bachelor’s degree or equivalent of education in Mechanical/Process/Production Engineering.

Experience

  • Minimum 3 years engineering experience working in mold design of Plastic/Elastomer production.

Skills

  • Knowledge and experience of 6 Sigma techniques, route cause analysis, elastomer production.
  • Compression/ Injection Mold design techniques. Ability in using Mold design software for reading/creating mold drawing.
  • Good communication skills, to be able to present ideas and concepts and delegate duties to others with effective monitoring and feedback.
  • Excellent problem solving and analysis skills.
  • Ability to plan, develop and deliver projects to time, cost and conclusion.
  • Resolve issues in a timely and empathetic manner.
  • To provide training and mentoring, sharing knowledge and ideas, management of others.

 

Jobbtitel: Semestervikarier
On-site
Plats: SWE - Kalmar
Ansök senast: 2024-04-06

ROLL OCH UPPGIFTER

Vi behöver anställa ett flertal semestervikarier till vår produktion. Främst till avsyningen på stansen men även till ett par andra positioner. Vi prioriterar att anställa anhöriga till oss som jobbar här.

Arbetstiden är 2-skift.

VÄLKOMMEN TILL ETT DYNAMISKT FÖRETAG

Vi är stolta över vårt företag och över det vi gör. Trelleborg Sealing Solutions Kalmar AB är världsledande inom sitt område och har goda tillväxt­möjligheter. Trots att vi verkar i ett internationellt sammanhang är stämningen på företaget familjär. Vi är raka och öppna mot varandra, måna om att samarbeta men också att var och en tar initiativ och ansvar. Kundfokus, kvalitet och leveransprecision är A och O för oss.

FRÅGOR?

Har du frågor är du välkommen att kontakta;

Martina Jonsson, HR-chef, 0480-49 94 59, martina.jonsson@trelleborg.com

Representant för IF Metall är Lars Pettersson, 076-890 71 29.

 

Ansökan

Urval sker löpande. Observera att vi endast tar emot ansökningar via vårt webbverktyg:

http://www.trelleborg.com/sv/karriar/lediga--tjanster

 

Sista ansökningsdag är 2024-04-07.

 

Vi undanber oss bestämt kontakt med mediesäljare, rekryteringssajter och liknande.

Trelleborg är världsledande inom specialutvecklade polymerlösningar för nästan alla branscher i världen. Och vi befinner oss där vi är i dag för att våra talanger tagit oss dit. Trelleborg har den polymertekniska spetskompetens som gör innovation och tillämpning möjlig. Vi har ett nära samarbete med ledande varumärken inom industrin för att påskynda deras utveckling och driva deras verksamhet framåt – och på vägen dit forma industrin och de framsteg som kommer att gagna mänskligheten under många spännande år framöver.

Trelleborg Sealing Solutions Kalmar AB med huvudkontor i Kalmar är världsledande inom  produktion och utveckling av ljud- och vibrationsdämpande komponenter till fordonsindustrin. Läs gärna mer om oss på www.rubore.com och www.trelleborg.com.

Jobbtitel: Maintenance Engineer
On-site
Plats: TUR - Gebze
Ansök senast: 2024-03-19

  • Prepare maintenance instructions and annual plans.
  • Ensure that the maintenance group's machine maintenance is carried out according to the relevant instructions and plans.
  • Provide and review the maintenance activities performed.
  • Review the statistical information generated regarding machine malfunctions and to make improvements as deemed necessary.
  • Train all personnel affiliated with the maintenance group and to carry out this training practically during machine maintenance and malfunctions.
  • Manage to work requests from the manufacturing units carried out by the maintenance group or supplier companies, depending on the nature of the work.
  • Test and receive machines and machine parts ordered by department managers and/or himself, using the necessary techniques, in line with developing technologies and company needs.
  • Seek solutions to existing problems and to carry out improvement efforts by working as a team with the relevant chiefs and responsible people.
  • Track energy consumption.
  • Check invoices for purchased machinery or spare parts.
  • Carry out Machinery/Equipment/Assembly/Disassembly activities when necessary.
  • Carry out the activities of identifying Key Equipment and keeping spare parts available.
  • Exercise the right of approval on matters such as recruitment, training, change of duties and leave of its employees.

 

  • Being a university graduate,
  • Strong human relations, prone to team work,
  • Preferably having experience in mass production,
  • Being proficient in Excel and Powerpoint programs,
  • Knowing English at a level that allows direct communication with global functions,
  • Not having any obstacle to domestic or international travel.

 

  • Service Routes

    Gebze: We provide service to every region except Şekerpınar.
    Izmit: It can be any region on the E-5 between Gebze and Izmit (Kartepe). The service goes via E-5.

    Istanbul 
    Service 1: Göztepe-Küçükyalı-Yakacık-Sultanbeyli-Kurtköy-Factory (via E-5)
    Service 2: Küçükyalı-Kartal-Pendik-Esenyalı-Tuzla-Factory (via E-5)

 

 

Jobbtitel: Automationstekniker
Plats: SWE - Värnamo
Ansök senast: 2024-03-13

Vill du jobba hos ett världsledande företag med stora framgångar på marknaden? Då kan ditt nästa jobb vara som Automationstekniker hos oss på Trelleborg i Värnamo.

Om Rollen

Trelleborg Seals & Profiles är ett marknadsledande och internationellt företag som nu erbjuder en tjänst som Automationstekniker. Vi befinner oss i ett intressant skede med många spännande projekt framför oss, och behöver förstärka organisationen med ytterligare en engagerad medarbetare. 

Vi söker en skicklig "automationare"  och är öppen för dig oavsett var du befinner dig i den yrkeskarriär. Tjänsten anpassar vi utifrån din nuvarande kompetens och dina intressen. Självklart välkomnar vi dig som är "senior" i rollen,  men har heller inget emot om du är i början av din karriär.

Huvudsakliga arbetsuppgifter:

  • Löpande reparationer och planerade underhållsarbeten.
  • Industrialisering och driva nya projekt/installationer.
  • PLC-programmering från uppstart till färdigt projekt.
  • Teknisk problemlösning och kommunikationslösningar kopplade till installerad utrustning.
  • Kontakt med maskin- och automationsleverantörer. 
  • Säkerställa hög driftsäkerhet i anläggningen.

Din Profil

Vi vill att du som söker har arbetat som programmerare, eller industrielektriker/serviceelektriker och därmed har god kompetens inom automation, PLC, felsökning och driftsäkerhet av maskinutrustning. Har du även kunskaper inom robotprogrammering är det ett extra plus. Utbildning inom automation är förstås bra, men inget krav. Du är dessutom praktikern som vänder problem till lösningar på plats ute i vår verksamhet. Vi förutsätter att du hanterar svenska och engelska i tal och skrift. 

Vi lägger stor vikt vid din personlighet. Vi vill därför att du är initiativtagande, flexibel och är bra på samarbete. Du bidrar till god stämning hos kollegor och hanterar externa intressenter professionellt, bl.a. genom bra kommunikation och hög service. Andra viktiga egenskaper är att du är bra på problemlösningar och har hög förmåga att leverera kvalitet och resultat. 

Vi Erbjuder

Du erbjuds en tjänst i ett marknadsledande företag med starkt varumärke där du får stora möjligheter att utforma din organisation och påverka ditt ansvarsområde.

Trelleborg är ett företag med stora utvecklingsmöjligheter. Företagets värdeord är: Innovation - Kundfokus - Ansvar - Prestation.

Arbetstider: Dagtid

Placeringsort: Värnamo

Anställningsform: Tillsvidaretjänst

Tillträde: Enligt överenskommelse

Ansökan: Tjänsten söker du omgående då vi tillämpar löpande urval.

I denna rekrytering samarbetar Trelleborg med Stella Rekrytering & Ledarskap. För mer information kontakta Magnus Ryberg, 070 271 69 77. Sök tjänsten via https://www.stellaab.se/lediga-jobb/ledigt-jobb/automationstekniker/265277 

Plats: AUS - Melbourne
Ansök senast: 2024-03-09

We are currently seeking an experienced Service Management professional or a candidate with an appropriate mix of skills and experience.  You may currently be a Service, Commissioning or Project Manager with a small team or an Engineering team lead.

Your role will encompass the key functions of driving outcomes in the field during installation, commissioning, and operation.

This is an interesting and dynamic role with jobsites worldwide.

More specifically you will:

  • Guide your global team to deliver commissioning and service solutions to Trelleborg clients world wide
  • Shape the business through the development and optimisation of current and future LMS Service processes
  • Work closely with like minded professionals in the Global Aftersales team including our Service Manager AMS, Technical Support & Spares Managers
  • Together with your Service Coordinator ensure that administrative processes are well maintained and transparent
  • Be a key driver of continuous improvement
  • Operate a safety first culture

You will have:

  • Relevant trade or university qualifications such as one or more of the following; instrumentation or electrical trades, electrical, automation, mechanical or mechatronic engineering degree, recognised project management certification
  • Minimum of 10 years relevant work experience in areas such as OEM equipment service, industrial equipment installation and commissioning, automation, ports or shipyard construction or maintenance. At least 5 years in a management role.  Other equivalent experience will be considered
  • Experience developing and leading team. Experience managing remote teams especially internationally will be highly regarded
  • Strong administration and administration management skills
  • Demonstrated ability to manage projects / contracts to time and budget constraints
  • A track record showing an ability to review and improve business processes
  • Extensive experience dealing with clients especially under time pressure
  • Excellent written communications

Note that some international travel will be part of this role.

If you’re interested in a global business where you can make a difference, we’d love to chat with you.

Don’t delay! We’re hiring as quickly as possible.

At Trelleborg our people are #shapingindustryfromtheinside

Plats: GBR - Leicester
Ansök senast: 2024-03-22

Do you want to experience new challenges and innovate the future of engineered polymer solutions? Accelerate your career with Trelleborg and start shaping industry from the inside.

Who are we?

Trelleborg Industrial Solutions (TIS) is a global leader in innovative polymer-based solutions for key industries and critical infrastructure. We are one of three Business Areas within the Trelleborg Group, with a total of about 6 000 employees around the world. 

Trelleborg Antivibration Solutions (AVS) develops and manufactures vibration components and system solutions. These are used in the rail vehicle industry, wind energy, agricultural and construction machinery as well as various selected industrial applications. Here, they provide an optimal performance and durability. Innovative products and a comprehensive understanding of vibration-related relationships make Trelleborg AVS a development partner for well-known industrial customers all over the world.

Would you like to be part of a great team as well as opportunities to grow your career? We have an exciting opportunity within our fantastic Technical department! Based at our Leicester site in the UK, the candidate will be part of an already established team and will drive continuous improvement across the site.

In this newly created role, you will be collating continuous improvement ideas from all departments ready for initial review and selection of ideas to progress. You will create justification packages for CI projects and assist departments by leading CI meetings, maintaining and planning actions for the implementation of a CI project according to a defined timing plan.

Main Responsibilities: 

  • Responsible for collating, evaluating and preparing a justification package for selected continuous improvement ideas ready for review by managers.
  • Assist responsible departments with planning activities to progress the C.I. Project to completion with a defined timing plan. Maintain a log of costs and delay durations with reasons.
  • The Continuous Improvements Co-Ordinator will be dedicated in providing the highest level of customer service and answer all enquiries in a timely manner.
  • The Continuous Improvements Co-Ordinator will provide assistance to other department members and share knowledge and best practices.
  • To assist the technical department during busy periods.
  • Communicate with service providers /suppliers to receive quotations for work.
  • Perform other similar or related duties as assigned or directed.
  • Must have the ability to work well in a team and be able to lead meetings and C.I. Project to a timely completion.

Education and Experience

  • A minimum of 2 years’ experience gained in a dynamic manufacturing environment.
  • Degree qualified in a Manufacturing Engineering qualification would be beneficial.
  • Good knowledge of lean manufacturing methods.
  • Good knowledge of project management and support functions and team working principles.
  • Must have the ability to interact well within a team and be able to lead meetings and projects to a timely completion.
  • Proficient with Microsoft office programs.
  • Experience of using M3 (ERP system) is beneficial.

Candidate Profile:

You will be an innovative and creative thinker with excellent analytical and problem-solving skills.  You will need to drive the C.I projects to successful completion, and therefore, communication is a key part of this role as you will be interactive with our internal partners. Therefore, we are looking for someone who has the ability to communicate professionally with confidence and concisely. Being a team player is a must and you will need to be effective in your influential skills using knowledge and best practice to achieve high standards for the C.I Projects.

Finally, we are also looking for a someone who will contribute towards our way of doing business; but will come up with innovative solutions and understands the meaningful role they play in the overall success of the company.

Application Process

Closing date for all applications is 23 February 2024 , and we look forward to getting in touch with you to discuss your application further.

Trelleborg is an equal opportunity employer! We celebrate diversity and are committed to creating an inclusive environment for all employees. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

Are you the one we’re looking for? Apply now by clicking the Apply button or email me for more information.

At Trelleborg our people are #shapingindustryfromtheinside 

Plats: DEU - Lathen
Ansök senast: 2024-06-29

Sie gehen neue Herausforderungen mit Leidenschaft an und übernehmen Verantwortung für Ihr Handeln? Dann werden Sie Teil unseres Teams und gestalten mit uns gemeinsam die Industrie von innen.

Wer sind wir?

Trelleborg Industrial Solutions (TIS) ist ein weltweit führender Anbieter von innovativen polymerbasierten Lösungen für Schlüsselindustrien und kritische Infrastrukturen. Wir sind einer der Geschäftsbereiche der Trelleborg Gruppe mit insgesamt ca. 6.000 Mitarbeitern auf der ganzen Welt.  Wir besetzen ab sofort die Position eines Mechatronikers/Elektroniker für die Instandhaltung (m/w/d) in der Verantwortung für unseren Standort in Lathen.

Über die Stelle

  • Umfassende Wartung und Instandhaltung aller produktionstechnischen Anlagen und aller technischen Betriebsmittel
  • Durchführung und Dokumentation von DGUV Vorschrift 3 Prüfungen
  • Selbstständige Fehleranalyse und Störungsbeseitigung an elektrischen Einrichtungen aller Produktionsanlegen, sowie in der Gebäudetechnik
  • Führen der Wartungs- und Inspektionsdokumentationen
  • Anlagenoptimierung im elektrischen und mechanischen Bereich
  • Mitarbeit bei kleineren Projekten

Über den idealen Kandidaten

  • Abgeschlossene Berufsausbildung zum Mechatroniker oder vergleichbar, z.B. Betriebselektriker mit mechanischen Kenntnissen
  • Fundierte Fachkenntnisse für den Betrieb und die Instandhaltung produktionstechnischer Anlagen in einem Industriebetrieb
  • Erfahrung in der Anwendung von S5 und S7 Steuerungen
  • Die Fähigkeit, komplexe Probleme zu identifizieren und pragmatische Lösungen zu entwickeln
  • Erfahrungen im Programmieren und Inbetriebnehmen von FUs
  • IT-Kenntnisse für die Dokumentation (insb. MS Word und Excel)
  • Teamorientierte Arbeitsweise mit ausgeprägter Kommunikationsfähigkeit
  • Grundlegende Englischkenntnisse

Was wir bieten

  • Wertschätzende Zusammenarbeit in einem Team, in dem offen kommuniziert wird
  • Möglichkeiten der externen und internen Weiterbildung
  • Firmenfitness über EGYM Wellpass
  • Weihnachts- und Urlaubsgeld
  • Vermögenswirksame Leistungen
  • Corporate Benefits Angebote

Bewerbungsprozess

Sind Sie die Person, die wir suchen? Bewerben Sie sich jetzt! Wir bieten ein vielseitiges Aufgabengebiet, in dem Teamgeist und Eigenverantwortung gefordert sind. Es erwartet Sie ein interessanter Arbeitsplatz.

Trelleborg ist ein Arbeitgeber der Chancengleichheit. Wir schätzen Vielfalt und verpflichten uns, ein integratives Umfeld für alle Mitarbeiter zu schaffen. Wir stellen sicher, dass für Menschen mit Behinderungen angemessene Vorkehrungen getroffen werden, um am Bewerbungsprozess teilzunehmen oder ihre Arbeit auszuführen.

Bei Rückfragen zum Stellenangebot melden Sie sich gerne bei Stephan Lünnemann (HR Manager) unter stephan.luennemann@trelleborg.com.

Plats: MLT - Hal Far
Ansök senast: 2024-03-05

The Process Engineer follows good manufacturing practices (GMP) and principles to provide engineering support and develop robust manufacturing processes. Has a primary role in the engineering of new, modified and/or existing manufacturing operations in a clean-room environment.

Candidates with 3+ years’ experience in Pharmaceutical / BioPharma or related manufacturing industry will be preferred.

Duties, responsibilities, and authorities:

  • Analyses new product specifications and translates these into manufacturing processes to establish production rates, achieve expected quality levels and establish the reliability of the finished product.
  • Responsible for the completion of the design and development of optimal, cost-effective, and reliable manufacturing processes.
  • Use demonstrated strengths in multiple aspects of medical component and device design and manufacturing capabilities to plan and accomplish goals.
  • Develops process parameters for secondary operations.
  • Conducts data analysis and collaboration with Quality Engineering.
  • Identifies Operational Qualification (OQ) process parameters and Performance Qualification (PQ) settings.
  • Develops and documents standard operating procedures (SOP) and product-specific operating procedures (PSOP).
  • Trains manufacturing personnel on SOPs and PSOPs.
  • Performs DOEs, and participates in the development of control plans, Process Maps, and PFMEA documentation.
  • Collaborates with internal cross-functional teams and corresponding outside vendors needed to meet project needs.
  • Uses standard problem-solving tools, e.g., 8D, 5 Whys, Fishbone.
  • Applies effective inter-departmental communication and escalation.
  • Owns tooling and process from a manufacturability standpoint from development to production release.
  • Partners with the Quality department on investigation and corrective action for any failed First Article Inspection or OQ/PQ
  • Proactively seeks and manages the execution of continuous improvements activities.
  • As an SME, partners with management to establish and develop site-specific processes as required/requested.
  • Lead engineering activities and support day to day operations in the manufacturing area/s.

Continuation of Duties and Responsibilities

  • Participate in "Gemba" walks and stand-up meetings as required.
  • Ensure all Environment, Health and Safety instructions are implemented.
  • Ensure safety performance is adequately communicated
  • Participate in risk reduction plans.
  • Provides mentorship to others through experiences and education as opportunities arise.

Skills/Education:

Required:

  • Degree in Mechanical/Electrical Engineering
  • Ideally 3+ years’ experience in Pharmaceutical / BioPharma or related manufacturing industry

Desired:

  • Master's degree in engineering or any related field.
  • Leadership/Supervisory experience, with decision-making authority/responsibility

Competencies:

  • Ability to read, write, speak, and understand the English and Maltese language.
  • Use of statistical analysis software.
  • Ability to coordinate multiple projects and deadlines, manage and identify the scope.
  • Act as a project leader on major projects.
  • Lean Manufacturing- Proficient in the use of problem-solving tools such as 5 why, Fishbone, 8D, etc.
  • Understanding of manufacturing processes for medical components and devices.
  • Good understanding of metrology principles and methods.

While all personal data will be treated in strict confidence, interested candidates are kindly requested to send their curriculum vitae via email on angela.garas@trelleborg.com

 

Please visit www.trelleborg.com/en/career/welcome  

Plats: MLT - Hal Far
Ansök senast: 2024-03-05

Materials Development Chemist

Job Description:

We are currently looking to recruit a full time Materials Development Chemist to develop new rubber compounds to meet the ever-increasing needs in the markets we operate across the globe.

Duties and Responsibilities include:

  • Develop new rubber compounds to meet customer specifications.
  • Improve existing rubber compounds to optimise physical, mechanical, thermal and processing performance.
  • Provide rubber compound technical service to customers and Trelleborg Group sites.
  • Compile technical literature/documentation for promotion purposes.

Qualifications:

  • BSc or MSc degree in Chemistry
  • Experience in rubber compound development and processing will be an asset (training locally and abroad will be given as required)

Why should you apply?

  • A competitive financial package is being offered to the right candidate. This includes free private medical insurance among other benefits.
  • The post offers career development opportunities both in Malta and abroad. Accelerate your career with Trelleborg.
  • Trelleborg Sealing Solutions Malta forms part of Trelleborg Group employing 24,000 employees worldwide. The Group has over 120 manufacturing facilities in more than 50 countries

 

While all personal data will be treated in strict confidence, interested candidates are kindly requested to send their curriculum vitae via email on angela.garas@trelleborg.com

 

Please visit www.trelleborg.com/en/career/welcome  to l

Plats: FIN - Sastamala
Ansök senast: 2024-02-29

Lähestytkö uusia haasteita intohimoisesti luotettavalla otteella?

Haluatko kehittää alaa vahvalla osaamisellasi? Meillä se onnistuu.

 

Keitä me olemme?

 

Trelleborg Industrial Solutions (TIS) on globaali edelläkävijä innovatiivisissa polymeeripohjaisissa ratkaisuissa keskeisille teollisuudenaloille ja kriittiselle infrastruktuurille. Olemme yksi Trelleborg-konsernin kahdesta liiketoiminta-alueesta, ja meillä on yhteensä noin 6 200 työntekijää eri puolilla maailmaa.

 

Trelleborg on maailman johtava valmistaja teknisissä polymeeriratkaisuissa, tiivistäen, vaimentaen ja suojaten kriittisiä sovelluksia vaativissa ympäristöissä. Innovatiiviset ratkaisumme nopeuttavat asiakkaiden suorituskykyä kestävällä tavalla.

 

Tietoa työpaikasta

 

Etsimme kunnossapitotyöntekijää määräaikaiseen työsuhteeseen 2 vuodeksi.

 

Tehtävät ja vastuualueet:

  • Muovin ruiskupuristuskoneiden ja käsittelyjärjestelmien parametrien optimointi
  • Tuotannon laadun varmistaminen
  • Robottijärjestelmien (Kuka/ ABB) ohjelmointi, asetteet ja optimointi
  • Koneiden/tuotteiden teknisten vikojen poistaminen (pääasiassa Engelin ruiskuvalukoneet)
  • Uusien työkalujen ja tuotteiden kehittäminen
  • Materiaalitestit
  • Koneiden huolto
  • Muottien huolto: Muottien pienet korjaukset.

 

Tietoja ihanteellisesta hakijasta

  • Muoviprosessimekaanikon koulutus tai usean vuoden kokemus tältä alalta.
  • Kokemus muovin ruiskuvalukoneiden parametreista
  • Korkea osaaminen vikojen paikantamisessa ja ongelman ratkaisussa
  • Suomen ja englannin kielen taito on pakollinen

 

Tarjoamme hakijalle

  • Vastuullista ja tuloshakuista tehtävää kansainvälisesti toimivassa teollisuusyrityksessä
  • Kannustavaa työympäristöä, joka tarjoaa hyvät uramahdollisuudet
  • Uraa ja kehittymistä tukevaa kolutusta
  • Mukavia työkavereita sekä nykyaikaisia laitteita
  • Houkutteleva kilpailukykyinen bonusjärjestelmä

 

Trelleborg on tasa-arvoinen työnanataja. Arvostamme sitä erityistä kokemusta ja asiantuntemusta, jota erilaisista taustoista tulevat ihmiset tuovat liiketoimintaamme. Kyky kehittää uraauurtavaa teknologiaa on yksi tärkeimmistä voimavaroistamme, ja työntekijämme mahdollistavat sen. Tarjoamme rohkaisevan ympäristön, joka mahdollistaa kasvun yrityksen sisällä ja investoimme samalla työntekijöiden koulutukseen. Tehtaamme on tiivis ja ystävällinen yhteisö, joka antaa sinulle mahdollisuuden ideoiden kehittelyyn muiden kollegoiden kanssa.

 

Lähetä hakemuksesi ansioluetteloineen ja asiaankuuluvine todistuksineen hakemustyökalumme kautta. Jos sinulla on kysyttävää, ota yhteyttä Henrik Pickel (henrik.pickel@trelleborg.com).

 

Tule mukaan meille Trelleborgiin rakentamaan uutta mullistavaa teknologiaa, jonka avulla asiakkaamme voivat luoda parempaa maailmaa!

 

Trelleborgilla henkilöstö on voima, joka muuttaa toimintaa sisältä päin. #shapingindustryfromtheinside.

Plats: FIN - Sastamala
Ansök senast: 2024-03-31

 

Do you approach new challenges with passion and take responsibility for your actions?
Be the change you want to see and start shaping industry from the inside.

Who are we?

Trelleborg Industrial Solutions (TIS) is a global leader in innovative polymer-based solutions for key industries and critical infrastructure. We are one of two Business Areas within the Trelleborg Group, with a total of about 6 200 employees around the world. 

Trelleborg is a world leader in engineered polymer solutions that seal, damp and protect critical applications in demanding environments. Its innovative solutions accelerate performance for customers in a sustainable way.

About the Job

We’re seeking a Maintenance Operator (m/f/d) temporary for 2 years. 

Roles & responsibilities:

  • Setting up plastic injection molding machines and handling systems
  • Ensuring production quality
  • Coding, setting and optimization of robot systems (Kuka/ ABB)
  • Elimination of technical faults on the machines/ products (mainly Engel injection molding machines)
  • Industrialization of new tools and products
  • Material tests
  • Definition of process parameters
  • Maintenance of the machines
  • Mold maintenance: Carrying out minor repairs to the molds

About the Ideal Candidate

  • Completed commercial training as a plastics process mechanic or several years of experience in this field
  • Experience in setting up plastic injection molding machines
  • High knowledge in troubleshooting
  • Proficiency in Finnish and English is mandatory

Our offer and benefits

  • A responsible and results-oriented task in an internationally active industrial company
  • We provide an encouraging environment which offers growth within the company while investing in employee training/education
  • Family and congenial working atmosphere with modern equipment
  • Attractive competitive compensation package

Trelleborg is an Equal Opportunity Employer, and we take pride in the diversity of our employees, valuing the special experience and expertise that people from different backgrounds bring to our business. The ability to develop ground-breaking technologies is one of our key assets and our people make it happen. We provide an encouraging environment which offers growth within the company while investing in employee training/education. Our facility is a close and friendly community which allows you to brainstorm your ideas with other colleges.

Please submit your application in English including your CV, motivation letter and relevant certificates.

Come and join Trelleborg to build the transformative technology that enables our customers to engineer a better world!

At Trelleborg our people are #shapingindustryfromtheinside

 

Jobbtitel: TECHNOLOGIST (METHOD ENGINEER)
On-site
Plats: CZE - Mlada Boleslav
Ansök senast: 2024-02-29

Máte zkušenosti s technologickým procesem ve výrobní firmě a domluvíte se anglicky? Chcete pracovat ve stabilní mezinárodní firmě s velmi dobře vypracovanými standardy a kvalitním produktem? Pak hledáme právě Vás!

Jobbtitel: Warehouse Team Member
On-site
Plats: USA - Chalfont, PA
Ansök senast: 2024-03-21

Are you looking for a safe, clean, and comfortable environment to work in? Are you someone who likes to be active and hands-on? Are you detail-oriented? Are you ready to work for a company that provides great benefits and allows you to grow while making an impact? 

At Trelleborg, every order shipped is essential and allows us to make a difference in our community. Founded in 1905, Trelleborg is a global organization operating within a multitude of industries. Our warehouse facility maintains a clean and well organized climate-controlled environment all year around.

As a Warehouse Associate, you will play a vital role in ensuring our customers receive their purchased products on time while meeting our high-quality standards. Our Warehouse Associates perform a variety of duties. 

Our three primary internal areas are:

  • Receiving: This team is responsible for the daily logging and receiving of product that comes into the warehouse.
  • Shipping: This team packs and ships orders to our customers while acting as the final quality check on the products before they reach the customer. 
  • Service Plus: This team provides value-added services for our customers such as bagging, kitting, and minor assembly. The work in this position is detail oriented. 

What we offer:

  • Competitive starting pay
  • Affordable, high-quality medical, dental, and vision insurance
  • Tuition Reimbursement program
  • 401K with company match
  • 12 paid holidays
  • Paid vacation time
  • Yearly bonus program
  • A clean, organized environment open to suggestions and committed to continuous improvement

Do YOU meet these Requirements?

  • High School Diploma or GED
  • Strong attention to detail

Application: 

Apply Here 

Last Application Date 3/20/2024

As an EEO/Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran or disability status.

This position requires the use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR.  ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. Green Card Holder), Political Asylee or Refugee

 

Jobbtitel: Werkzeugmacher (m/w/d)
On-site
Plats: CHE - Stein am Rhein
Ansök senast: 2024-04-30

Trelleborg ist ein weltweit führender Anbieter von Polymerlösungen für nahezu jede Industriebranche auf der Welt. Fachkompetenz, Engagement und Spezialisierung haben uns in diese Position gebracht. Mit unseren innovativen Polymerlösungen setzen Marktführer ihre Geschäftsziele beschleunigt um – und entwickeln Anwendungen, von denen die Gesellschaft in den kommenden Jahren profitieren wird.

Die TSS Switzerland AG ist ein führender Entwickler, Hersteller und Lieferant von Flüssigsilikonteilen für anspruchsvolle Anwendungen in der Medizintechnik, pharmazeutischen Industrie, Automobilindustrie und der Nahrungsmittel- und Getränkeindustrie. Wir sind zertifiziert nach ISO 9001, ISO/TS 16949, ISO 13485 und ISO 14001.

Zur Verstärkung unseres Teams suchen wir am Standort Stein am Rhein zum nächstmöglichen Zeitpunkt einen

Werkzeugmacher (m/w/d)

Wir zählen auf Sie und übertragen Ihnen folgende Hauptaufgaben

  • Sie arbeiten im Zusammenbau und in der Feinabstimmung von technisch anspruchsvollen Spritzgiesswerkzeugen
  • Sie erledigen die Eingangskontrolle von extern beschafften Neuwerkzeugen
  • Sie analysieren Werkzeugprobleme
  • Sie erarbeiten Lösungsvorschläge zur Optimierung und deren Umsetzung
  • Sie führen Unterhaltsarbeiten und Reparaturen durch
  • Sie erstellen Dokumentationen
  • Sie erarbeiten vorbeugende Massnahmen an Spritzgiesswerkzeugen und Zubehör um bei zukünftigen Produktionen die Fertigung zu sichern

Ihr Profil

  • Sie haben eine abgeschlossene Ausbildung zum Polymechaniker/Werkzeugmacher und mehrjährige Berufserfahrung im Formenbau
  • Sie haben Erfahrung in der Montage und kennen sich aus bei der Reparatur von Spritzgiesswerkzeugen
  • Sie sind sicher im Umgang mit MS Office Programmen
  • Sie haben gute Deutschkenntnisse in Wort und Schrift

Sie schätzen an uns

  • interessante und abwechslungsreiche Aufgabenbereiche
  • moderne Infrastruktur
  • kompetentes Team
  • dynamisches Unternehmen
  • umfangreiche Einarbeitungszeit

Wenn wir Ihr Interesse geweckt haben,

freuen wir uns auf Ihre Bewerbung unter Angabe Ihrer frühestmöglichen Verfügbarkeit und Ihrer Gehaltsvorstellungen unter:  http://www.trelleborg.com/en/career/vacancies

Bei Fragen stehe ich Ihnen gerne zur Verfügung

Jennifer Lawrenz-Mancino, HR, Tel: +41 52 742 01 73

 

Plats: NLD - Ridderkerk
Ansök senast: 2024-08-31

Are you ready for an extraordinary opportunity that combines your passion for engineering with a sense of adventure? We are currently seeking a skilled “Technical Service Engineer & Commissioning Engineer” who is willing to embrace extensive travel within Europe and beyond as needed.

Plats: FRA - Carquefou Cedex
Ansök senast: 2024-03-31

Avec 16 000 employés sur les cinq continents, TRELLEBORG est un leader mondial dans le domaine du caoutchouc et des polymères industriels. Nous proposons des solutions d'étanchéité et de protection à toutes sortes d'industries dans le monde entier, ainsi que des systèmes d'amortissement des vibrations. Nous offrons à nos clients des solutions dédiées basées sur une technologie polymère de pointe et une expertise unique pour leurs applications.

La Business Unit Boots (BU) est présente en Europe, en Asie, en Amérique du Nord et en Amérique du Sud. Elle fournit des soufflets de direction et de transmission thermoplastiques et est le leader mondial sur ce marché.

Son site français, siège de la Business Unit, abrite deux activités : une usine de production, qui fabrique pour le marché européen, et un centre de R&D, qui développe de nouveaux produits destinés à être fabriqués par l'ensemble des usines de la Business Unit.

Les missions :

Dans le cadre du développement industriel à l’international de l’entité Trelleborg Boots, et au sein du service industrialisation, le poste a pour missions principales :

- Assurer la mise en place des nouveaux outils de production

- Gérer le stock des pièces

- Suivre les interventions de prestataires

- Accompagner les clients (atelier de production, différents services) sur les opérations de maintenance curative, préventive et prédictive suivant les caractéristiques des équipements

- Assurer les modifications et améliorations des machines et autres moyens

- Être le (la) garant(e) de la satisfaction des clients (atelier de production, différents services)

- S’assurer que l’ensemble des moyens respectent les exigences sécurités réglementaires

- Proposer des actions d'amélioration, de réduction de consommation d’énergie et de réduction des couts de maintenance

Profil requis

- Maîtrise de l’anglais (lu, écrit, parlé)

- Bac +2 ou expérience significative en maintenance industrielle

- Connaissances en mécanique, pneumatique, hydraulique, électricité

- Sens développé du contact, rigueur, anticipation des besoins, autonomie

 

Apprécié

- Habilitation électrique

- Expérience en plasturgie et connaissance du milieu automobile

- Connaissance du procédé IBM, EBM, Injection (maintenance d’équipement)

-Connaissances en automatismes et technologies digitales en industrie

Contrat

Poste à pourvoir dès que possible à temps plein (40h45 par semaine de temps de présence).
Statut ETAM, RTT et autres congés d'entreprise.
Chèques déjeuner.
Rémunération : à déterminer selon le profil

 

Plats: CHE - Algetshausen
Ansök senast: 2024-04-30

Die Trelleborg Sealing Solutions Switzerland AG ist ein führender Entwickler, Hersteller und Lieferant von Flüssigsilikonteilen für anspruchsvolle Anwendungen in der Medizintechnik, pharmazeutischen Industrie, Automobilindustrie und der Nahrungsmittel- und Getränkeindustrie. Wir sind zertifiziert nach ISO 9001, IATF 16949, ISO 13485 und ISO 14001 und zählen rund 140 Mitarbeitende. Unter anderem stellen wir 2-K-Formteile sowie Teile für die Medizinbranche im Reinraum her.

 

Zur Verstärkung unseres Teams suchen wir am Standort Algetshausen (SG) zum nächstmöglichen Zeitpunkt einen

 

Polymechaniker/Werkzeugmacher (m/w/d)

 

Wir zählen auf Sie und übertragen Ihnen folgende Hauptaufgaben

  • Sie haben Interesse am Senk- und Drahterodieren und haben bereits in diesem Bereich gearbeitet
  • Sie montieren komplexe und hochsensible Spritzgusswerkzeuge überwiegend im 2K Bereich
  • Sie können fräsen, drehen und flachschleifen (Heidenhain, Fanuc, Hypermill z.B.)

Ihr Profil

  • Sie haben eine abgeschlossene Ausbildung zum Polymechaniker, vorzugsweise im Werkzeugbau
  • Sie besitzen gutes technisches Verständnis
  • Sie arbeiten selbstständig und haben Qualitätsbewusstsein
  • Sie haben gute Deutschkenntnisse in Wort und Schrift

Sie schätzen an uns

  • interessante und abwechslungsreiche Aufgabenbereiche
  • kleines kompetentes Team
  • dynamisches Unternehmen
  • flexible Arbeitszeiten

Wenn wir Ihr Interesse geweckt haben,

freuen wir uns auf Ihre Bewerbung unter Angabe Ihrer frühestmöglichen Verfügbarkeit und Ihren Gehaltsvorstellungen.

Bei Fragen stehe ich Ihnen gerne zur Verfügung:

Jennifer Lawrenz-Mancino, HR, Tel: +41 52 742 01 73

Plats: DNK - Helsingør
Ansök senast: 2025-12-31

Hej - og tak fordi du kigger forbi - det tyder på, at du har fattet interesse for os, hvilket vi er rigtig glade for.

Om du ønsker at arbejde i produktionen eller i vores administration, vil vi rigtig gerne høre fra dig.

Hvis du vil søge et job i administrationen, så skal du gå ud af dette opslag og finde det opslag der hedder "Søg uopfordret i Administrationen hos TSS Helsingør".

Lidt om os
Trelleborg Sealing Solutions Helsingør får biler til at yde mere, fly til at lande stabilt og gravkoen til at bryde igennem det umulige, for vi er 350 engagerede kolleger, der er specialiserede i udvikling og produktion af tætningssystemer til højteknologiske virksomheder inden for hydraulik-, bil-, fly-, skibs-, olie- og maskinindustrien. 

Vi tror på, at arbejdsglæde ikke kommer af sig selv – til gengæld tror vi også på, at den både smitter og skaber engagement omkring sig. Så vi forventer (både af os selv og af dig), at vi sammen skaber et miljø, hvor arbejdsglæden er i højsædet side om side med kvalitet, ansvarlighed og engagement.

Vi tror på, at vores samlede perspektiver, vores samlede kompetencer, vores samlede viden og vores fælles ambitioner er vores styrke - men vi ved også, at vi hele tiden skal arbejde på at blive bedre til bruge hinanden, til at tale ærligt og konstruktivt, til at sige til og fra, til skabe forbedringer og til at være modige.

Produktion
Hvis du søger produktion, skal du trykke på "APPLY" og udfylde det skema, der kommer frem. Vær opmærksom på, at du skal scrolle ned for at få det hele med. Herefter kan du også uploade din ansøgning og dit cv, hvis du vil. Det er ikke et krav!

Du skal vide, at der kun er en meget lille chance for at få en dagsholds-stilling, da vi har en venteliste og prioriterer vores nuværende medarbejdere, når muligheden byder sig. Derfor skal du allerede nu tage stilling til, om du kan (og vil) arbejde aften og/eller nat. Weekendholdet er kun muligt for meget få og kun for eksisterende medarbejdere.

Hvis du har særlige kvalifikationer fx svendebreve, erfaring med CNC, erfaring som industritekniker eller maskinarbejder, erfaring med arbejde i plast, erfaring med kvalitetskontrol, erfaring med ensidigt arbejde eller lignende, så husk endelig at skrive det på.

Gældende for alle ansøgninger
Skriv i overskriften, hvad det er for et job, du søger (fx cnc-operatør, operatør m.v.). På den måde kan vi bedre sende dig i den rigtige retning..

Fortæl om, hvordan du vil bidrage til at gøre TSS til en endnu bedre arbejdsplads, og hvordan du skaber arbejdsglæde for dig selv og dine kollegaer. Vi håber selvfølgelig, at dine tidligere arbejdsgivere og kolleger giver dig ret :)

Fortæl os også lidt om, hvad du mener ansvar, stabilitet og arbejdsglæde er for dig. Det går vi nemlig ret højt op i.

Vi vender tilbage, såfremt vi har en stilling ledig, som du kunne være en god kandidat til - indtil da må du nøjes med vores 1. bekræftelsesmail og et "Tusind tak" for din interesse.

Vi beholder ansøgninger i 6 måneder. Herefter slettes de. Så ønsker du fortsat at være i vores jobbank, skal du desværre oprette dig igen. Trods det ekstra besvær er vi således sikre på, at dem, der er i Jobbanken, er aktive og interesserede, samt at vi overholder lovgivningen, men vi beklager det ekstra besvær for dig.

Held og lykke med jobsøgningen.

Masser af hilsner fra

Anja Berlin
HR-chef