Research & Development / Engineering

Within Research & Development / Engineering you manage or perform scientific research and development to improve products and services

Lediga tjänster

Nedan hittar du alla våra lediga tjänster just nu. Om du hittar något som passar, skicka in en ansökan idag!

Jobbtitel
Plats
Ansök senast
Plats: SVN - Kranj
Ansök senast: 2024-03-31

If you have a creative mind set to use existing capabilities and develop innovative solutions and high ability to learn new applications, technologies and capabilities, be kindly invited.

Jobbtitel: Innovation Center Manager
On-site
Plats: USA - Minneapolis, MN
Ansök senast: 2024-03-20

Summary of the role: 

Develops and achieves Innovation Center (IC) Department initiatives to support corporate goals and objectives. Manages overall company IC resources, internally and externally, maintaining required capacity and capabilities to meet forecasted demand. Optimizes both human and capital resources through continuous improvement activities.

Tasks and Responsibilities: 

Develop, implement, and maintain an Innovation Center (IC) strategy
• Establishes, monitors, and reports IC’s department goals and objectives
• Appropriately staffs and manages a team to support the strategy
• Provides proactive and timely work direction, feedback, and coaching to direct reports
• Provides departmental succession planning through cross-training and mentoring
• Guides the team related to troubleshooting, project management, and customer interface.
• Demonstrates objective and critical thinking as a model for other staff members
• Facilitates IC estimates, designs and project execution.
• Maintains project schedules by managing workloads
• Meets customer expectations
• Develop world class business and manufacturing processes to support the rapid development of life saving components, devices and therapies
• Provide DFM (Design for Manufacturability) support for customers
• Collaborates across business unit locations to share resources, manufacturing best practices, technology and processes
• Research and analyze new technologies
• Strong knowledge of Trelleborg’s manufacturing capabilities to design customer solutions to utilize capabilities and build annuity business
• Collaborates with Quality and Regulatory Team to ensure SOP’s are followed, corrective actions are implemented, and repeated occurrences are resolved timely
• May be assigned special assignments to support the strategic goals of the business
• Other duties as assigned

Travel Requirements: 

  • 10-25% domestic and international 

Education and Experience: 

Required:
• Bachelor's degree in Engineering or related field or 10 years equivalent experience
• 10+ years in polymer conversion and/or manufacturing
• Demonstrated successful leadership/supervisory experience

Desired:
• 5+ years in Medical Device Manufacturing
• Silicone and Thermal Plastic tooling/molding/manufacturing experience

As a valued Trelleborg team member, you will enjoy:  

  • A fulfilling career with greater opportunity for impact
  • A fun and rewarding company culture
  • Competitive salary
  • Generous benefits package: Health, Dental, Vision, STD, LTD, Life, 401k
  • Paid time off
  • Paid holidays
  • Bonus

 

Apply here!

 

Jobbtitel: Test Engineer
On-site
Plats: GBR - Bridgwater
Ansök senast: 2024-02-29

Do you approach new challenges with passion and take ownership for your actions? Be the change you want to see and start shaping industry from the inside.

Tasks and Responsibilities

Who are we?

Trelleborg is a world leader in engineered polymer solutions that seal, damp and protect critical applications in demanding environments. Our innovative engineered solutions accelerate performance for customers in a balanced way. We develop high-performance solutions that seal, damp and protect in demanding industrial environments.

At Trelleborg Sealing Solutions Bridgwater, we're dedicated to precision engineering and manufacturing excellence. We take pride in delivering top-quality products to our clients, and we're looking for a proactive and motivated Test Engineer to join our team.

About the Job

This role will focus on the testing and development of seals for rotary and high-pressure applications. Working with the Senior Test Engineer, you will be responsible for working closely with the Product Engineers and our Customer Solution Centres.

  • Safety at Work: Collaborate with the team to ensure a safe working environment. Conduct risk analysis, ensure COSHH data compliance, and clear test setups for use.
  • Setup and Execution: Organize the correct test setup and equipment for accurate testing.
  • Feedback and Modifications: Evaluate results, provide detailed feedback, and suggest modifications or next steps.
  • Adaptation: Understand why tests don’t run as hoped and modify arrangements for future success.
  • Understanding Why: Go beyond data collection. Analyze test records and logs to understand the “why.”
  • Reporting: Provide accurate completion and detailed reporting of test activities.
  • Facility Care: Be accountable for maintaining the test lab facilities.
  • Continuous Learning: Stay updated on new technologies and techniques.

About the Ideal Candidate

Education and Experience:

  • Engineering background, either through apprenticeship or degree
  • Experience with high pressure systems, pressure vessels, PSSR, and fixtures and fittings
  • Practical skills and understanding of Engineering Processes will be necessary
  • IT proficient in basic 3D CAD and Microsoft Office

Competencies:

  • Creative Problem-Solving Skills
  • Effective workload prioritization.
  • Excellent verbal and written communication skills.

Behavioral Characteristics:

  • Lead by example, actively contributing to departmental and company goals.
  • Take initiative for personal development.
  • Collaborate effectively within a team and work independently with efficiency.
  • Maintain an excellent attendance and punctuality record.

Closing date: Thursday 29th February

Join us in shaping the future of sealing solutions! Apply now to be a part of our team and embark on a journey of innovation and impact.

At Trelleborg our people are #shapingindustryfromtheinside

Trelleborg is an equal opportunity employer! We celebrate diversity and are committed to creating an inclusive environment for all employees. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

Jobbtitel: Process Engineer
On-site
Plats: USA - Tukwila, WA
Ansök senast: 2024-04-11

Summary of the Role: 

The Process Engineer supports the team with process expertise; develop, maintain, and improve systems, processes, procedures and process controls.

Tasks and Responsibilities: 

  • Supports operation's tasks ranging from daily assignments to long term projects. 
  • Regularly interacts with shop floor employees, leads and supervisors to understand issues and identify technical solutions. Provides regular training to supervisors and shop floor operators. 
  • Continuously manages several Manufacturing Excellence projects to reduce manufacturing costs. Serve as change agent in continuous improvement.  
  • Active participant in site wide continuous improvement activities. Idea generation and project implementation. 
  • Manage CAPEX Projects; identify, justify and implement project. Projects ranging from $3k to $100k+
  • Lead root cause analysis exercises with a cross-functional team. Manage corrective action plan to completion in a timely manner. 
  • Support or develop the design of new tools. Quote and manage new tool builds and tooling repairs with external vendors on a regular basis. 
  • Design shop floor fixtures and manufacturing aids. Quote and manage builds with external vendors on a regular basis. 
  • Develop/Modify work instructions to reflect best practices clarifying instructions and optimizing production efficiency. 
  • Create and manage Engineering Change Notices (ECNs) to completion. 
  • Regularly interact with external customers regarding technical topics providing clear and thorough responses. 
  • Support New Product Induction (NPI) team with tooling and process design. 
  • Support Purchasing and Quality Departments with offsite vendor visits and audits as needed. 
  • Support Quality Department with technical expertise as needed.

Education and Experience: 

  • BS/BA in related technical field; or 3-5 years related experience and/or training; or the equivalent combination of education and experience.

Competencies: 

  • Math and blueprint reading skills are required
  • Ability to analyze technical data
  • Good knowledge of Microsoft Word, Excel and Outlook
  • Good communication skills – verbal and written
  • Ability to read and communicate effectively within all internal departments
  • Ability to solve practical problems and deal with a variety of variables
  • Demonstrates good judgment in investigating problems

Application: 

Apply Here 

Please right click on the link to open in a new tab 

As an EEO/Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran or disability status.

This position requires the use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR.  ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. Green Card Holder), Political Asylee or Refugee

Plats: IND - Ahmedabad
Ansök senast: 2024-03-31

Do you want to experience new challenges and innovate the future of engineered polymer solutions? Accelerate your career with Trelleborg and start shaping industry from the inside.

Who are we?

Trelleborg Industrial Solutions (TIS) is a global leader in innovative polymer-based solutions for key industries and critical infrastructure. We are one of three Business Areas within the Trelleborg Group, with a total of about 6 000 employees around the world.

Trelleborg Marine & Infrastructure are committed to advancing operational performance in marine, port and built infrastructure, empowering our clients to succeed at the highest level.

About the Job

As a Design Engineer you have responsibility to finish the design, modelling & drafting work allocated to you by your seniors in an efficient and timely manner. This job will entail completion of 3D models and engineering drawings, maintaining work documentation and keeping all projects organized. You will work with Engineers/Project Managers based in different location worldwide to ensure that your work fully aligns with the Customer’s requirements and is in line with TMS standards. The duties and responsibilities of the Design Engineer is not limited to those listed below and are subject to change as per needs of the business.

  • Providing CAD support for products associated with the Customer Group activities.
  • Read and understand the project requirement and connect with respective project owners to clarify data required to complete the project.
  • Discuss with line manager about the project assigned.
  • Maintain all communication in written through mail, even if telephonic discussion is made. Summarize mail should be sent for discussed points to respective persons.
  • Should follow effective modelling and drawings practice.
  • Ensure Information on drawings and documents are accurate and aligning to the requirement.
  • The successful and timely delivery of all drafting and modelling assigned work to you.
  • Ensure models and dwgs built / issued for any product are feasible for manufacturing, assembly and installation.
  • Micro planning of tasks assigned.
  • Follow defined company processes and standards.
  • Maintaining customer centricity and ensuring customer happiness through delivery of your work.
  • Performing engineering activities on a day-to-day basis.
  • Checking of other engineer’s models, drawing and other technical documents.
  • Maintaining drawing archives.
  • Ensure, given responsibilities on or before time, with full accuracy.
  • If given task is completed, you should approach your immediate line manager.
  • Carry out general tasks as designated by the line manager.
  • Communicate efficiently both in writing and verbally
  • Moderate to strong understanding of engineering principles

About the Ideal Candidate

  • BE / B.Tech / ME / M.Tech in Mechanical Engineering or a similar field. With minimum 3 years of work experience design and engineering.
  • Hands on experience in Autodesk Inventor
  • Having knowledge of I-logic, cad automation would be an added advantage.
  • Exposure to working methodology as per ISO9001

Trelleborg is an equal opportunity employer! We celebrate diversity and are committed to creating an inclusive environment for all employees. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

“Don’t delay! We’re hiring as quickly as possible”

At Trelleborg our people are #shapingindustryfromtheinside

Jobbtitel: Compounder
On-site
Plats: SVN - Kranj
Ansök senast: 2024-02-29

We would like to invite to our team a member who has persevering personality is upbeat, curious and creative and communicates effectively, has prioritizing and coordinating skills. If you have a natural interest in investigation and research actions, feel welcome to apply.

Plats: DEU - Lindau
Ansök senast: 2024-05-28

Zum nächstmöglichen Zeitpunkt suchen wir für unseren Standort in Lindau am Bodensee einen Projektingenieur / Application Engineering (m/w/d).

Sie übernehmen

  • Entwicklung von Formteilen und Extrudaten aus Silikon nach Kundenanforderungen
  • Projektaufgaben von Artikelneuanlage bis Serienreife in Zusammenarbeit mit beteiligten Schnittstellen
  • Unterstützung bei Kalkulationen und der Angebotserstellung
  • Erstellung von Spezifikationen für Werkzeuge und Vorrichtungen

Dafür bringen Sie mit 

  • Abgeschlossenes Studium der Fachrichtung Verfahrenstechnik, Kunststofftechnik, Maschinenbau oder vergleichbare Ausbildung mit Berufserfahrung
  • Gute Kenntnisse in Catia V5, MS-Office Anwendungen sowie in ERP-Systemen
  • Idealerweise Kenntnisse auf dem Gebiet der Silikonelastomer-Verarbeitung und/oder der Luftfahrtindustrie
  • Grundkenntnisse in FE-Simulation Abacus
  • Hohe Serviceorientierung, Eigeninitiative und systematische Arbeitsweise
  • PKW-Führerschein
  • Sehr gute Deutsch- und Englischkenntnisse

Wir bieten Ihnen

  • Abwechslungsreiche Aufgaben
  • Bezahlung nach Tarifvertrag Chemie West
  • Teamorientiertes Arbeiten und eine intensive Einarbeitung
  • Ansprechende Sozialleistungen & 30 Tage Urlaub pro Jahr sowie extra Urlaub durch Zukunftstage

Nehmen Sie Ihre Karriere jetzt in die Hand! Wir freuen uns auf Ihre Bewerbung.

Wir freuen uns auf Ihre Bewerbung unter Angabe Ihrer frühestmöglichen Verfügbarkeit und Ihrer Gehaltsvorstellung.

Bei Fragen steht Ihnen das Recruiting Team sehr gerne zur Verfügung:

Carlos Lopez, HR
Tel: +49 711 7864 364

Stefani Sabotinova, HR
Tel: +49 711-7864-749

#Shaping industry from the inside#

Trelleborg ist ein Arbeitgeber, der die Chancengleichheit fördert. Wir sind stolz auf die Vielfalt unserer Mitarbeiter und schätzen die besonderen Erfahrungen und Kenntnisse, die Menschen mit unterschiedlichem Hintergrund in unser Unternehmen einbringen. Die Fähigkeit, bahnbrechende Technologien zu entwickeln, ist eines unserer wichtigsten Güter, und unsere Mitarbeiter machen dies möglich.

Jobbtitel: Engineer - Material Laboratory
On-site
Plats: IND - Bangalore
Ansök senast: 2024-03-31

Are you a talent looking to build business skills, gain experience, and take on exciting challenges? Grow your career with Trelleborg and start shaping the industry from the inside.

Who are we?

Imagine working for one of the leading hydraulic & pneumatic seal manufacturers in the world. Trelleborg Sealing Solutions is one of the largest seal manufacturers in the world with over 28 strategically located, world-class production facilities across four continents. Research and Development India, a unit under Trelleborg India Pvt Ltd is located near Electronic city.

About the Job

You will be part of a planning and development of the Materials testing lab facility and responsible for test method design and implementation, conducting design of experiments, interpretation of data, drawing conclusions, and preparing final test reports related to polymer testing in the Material Laboratory using a variety of state-of-the-art laboratory equipment.

This position will have an high-functioning team to support customers in various market segments.

Educational qualification:

  • Master's or Bachelor degree  in Engineering in Polymer/Chemical/Rubber Technology, Physics, Chemistry  or equivalent

Experience:

  • 5 years of laboratory experience and proficiency in testing Elastomeric materials, Calibration & maintenance, and familiarity with ASTM, DIN & ISO standards. 
  • Proficiency with 5S practices
  • Proficiency within ISO, safety, and chemical systems

Must Have Skills:

  • Technical knowledge of polymeric materials & chemicals, analytical skills, troubleshooting, Problem-solving, Communication skills, attention to detail & 5S.

Application Process

Trelleborg is an Equal Opportunity Employer, and we take pride in the diversity of our employees, valuing the special experience and expertise that people from different backgrounds bring to our business. The ability to develop ground-breaking technologies is one of our key assets and our people make it happen.

Call to Action

Don’t delay, apply today by submitting your CV along with your expected salary and notice period!

Our benefits for you

  • Work in multicultural environments
  • Family friendly and life-phase oriented company culture
  • Flexible work hours with mobile work quantum

Feel free to contact our HR Team for any questions:

Ashwini @ ashwini.venkatesh@trelleborg.com

Last Application date: 30th January 2024.

Plats: USA - Fort Wayne, IN
Ansök senast: 2024-07-01

DUTIES: Manage and Develop Americas Enterprise Information Systems(EIS) Team for following areas: Marketing, Supply Chain Management, Manufacturing and Finance; define and implement Americas EIS strategy; define and implement business processes; establish an IT Team as single point of contact to all Americas sites; work closely with Technical competence team, TSS India and IT Project Management Office to coordinate technical implementation; act as a champion of standards throughout the business unit strategy and architecture boards; identify opportunities to simplify processes with a view to remove complexity from the organization; work closely with business to understand its requirements and translate them into architectural requirements; manage the creation and the maintenance of the department budget, by gathering new projects requests, by preparing fixed cost planning, by approving vendor invoices, by monitoring assigned Capex, by flagging variances immediately, and by commenting department results on a monthly basis; among other duties. In addition, manage the acquisitions, mergers and integrations of Trelleborg facilities globally.

MINIMUM REQUIREMENTS: 15 years of experience in job offered or as IT Senior Manager and/or IT Director. Experience must include: 15 years of experience working with JD Edwards EnterpriseOne ERP system with both implementation and hands on configuration experiences; 5 years of experience working with IT Methodologies, including PMBOK – Project Management, BABOK, Business Analysis and ITIL – IT Governance and Change Management; 5 years of experience working with project management Methodologies and experience managing IT projects, including Waterfall, Agile/Scrum; 5 years of experience working with operational best practices in the field of manufacturing, supply chain, marketing, sales, and finance; experience working with FDA and ITAR regulations; 5 years of experience with acquisitions, mergers, divestments and integrations of new businesses; experience working with financial accounting in order to manage the budget of the department and capital requests; and experience building and leading organizations. Domestic and international travel required up to 50%.

OTHER: Employer: Trelleborg Sealing Solutions US, Inc. Job Site: 2509 Bremer Road, Fort Wayne, IN 46803; 40 hours/week. If offered employment must have legal right to work in U.S. 

Please apply via the button below or directly to Stefanie Sinn: stefanie.sinn@trelleborg.com 

Jobbtitel: Design Engineer
Hybrid
Plats: NLD - Ridderkerk
Ansök senast: 2024-04-30

Trelleborg is a world leader in engineered polymer solutions for almost every industry in the world. And we are where we are because our talents brought us here.

We, at Trelleborg Infra, are currently seeking a dynamic and results-driven Design Engineer to join our passionate team. At Trelleborg, we are committed to shaping the future of sustainable and resilient infrastructure worldwide.

Who are we?

Our mission is to pioneer innovative solutions that redefine the limits of what can be achieved. Our focus lies in the realm of building infrastructure, where the common challenge is to ensure effective sealing, damping, and protection against water. With a rich history spanning over a century, we have been instrumental in landmark projects. Notably, our Infra-team has contributed to the development of various iconic structures such as the Oosterscheldekering and Maeslandkering storm surge barriers, as well as significant water management initiatives like 'Room for Water'. Our contributions extend globally, encompassing the realization of numerous immersed tunnels including the Coentunnel and Heinenoordtunnel, among many others.

Moreover, our endeavors extend to the development of sophisticated techniques for sealing and safeguarding offshore wind applications, alongside our dedication to other renewable energy initiatives. As projects continue to evolve in complexity and scale, we remain steadfast in accepting the inherent challenges. Our approach at Trelleborg Infrastructure is not that of a mere supplier, but that of a trusted and adept business partner to our clients. While suppliers may offer products, we pride ourselves on delivering enduring, comprehensive solutions that stand the test of time.

What is the challenge

At Trelleborg, we believe we can achieve more together. What is the specific technical challenge the client has and how can we adept to their needs? Are there creative solutions we can develop to maintain our status as a high-end tailor-made rubber solutions provider? And how do we capture this in a solution ready for manufacturing to take over? Questions we deal with daily and that’s where you come in.

As Design Engineer you analyze customers' technical needs and design a technical solution to meet these. The technical solutions we provide aim to seal, damp or protect in critical applications and demanding environments with polymer (elastomer) materials. Together with Sales and Production you develop a proposal for the solution you designed to the customer. During the sales process you are responsible for handling of the technical scope, whereas during the production phase you are responsible that the functionality of the manufactured product complies to your design. Therefore, managing partners for the technical scope throughout these processes is essential. Furthermore, you support Sales with your technical expertise for continuous development in our market segments and identify technical opportunities to strengthen our position.

Who are you?

You are an open, pragmatic, and structured specialist. You connect easily with people on all levels, and you are culture sensitive. You thrive in an environment where creativity is key and where you are enabled to make valuable contributions from scratch. As a standout colleague, you focus on the highest quality possible, and you’re not afraid to ask the vital questions to achieve that goal and to keep learning to grow your knowledge.

What do you bring?

  • Technical BSc or MSc degree (civil / mechanical engineering or similar)
  • Availability and eligibility to travel to USA, Canada, Singapore, China and EU
  • 2 - 5 years' experience

What do we offer?

At Trelleborg, you will get the chance to accelerate customer performance with environmentally positive solutions, as well as growing and improving yourself and the communities you are part of. You can expect a career path focused on growth, a competitive salary, and good secondary benefits. If you would like to discuss salary range, please don’t hesitate to call, or send a message.

Interested?

Please apply by sending your resume and motivation via the application button.

Trelleborg is an equal opportunity employer! We celebrate diversity and are committed to creating an inclusive environment for all employees. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

 

Jobbtitel: Design Engineer
Hybrid
Plats: NLD - Ridderkerk
Ansök senast: 2024-04-30

Stap in de dynamische wereld van Trelleborg - Waar Innovatie, Uitdaging en Passie samenkomen!

Trelleborg is een wereldleider in technische polymeeroplossingen voor vrijwel elke industrie ter wereld. En we zijn waar we zijn omdat onze talenten ons hier hebben gebracht.

Bij Trelleborg Infra zijn wij momenteel op zoek naar een dynamische en resultaatgerichte Design Engineer om ons gepassioneerde team te versterken. Bij Trelleborg zetten we ons in om de toekomst van duurzame en veerkrachtige infrastructuur wereldwijd vorm te geven.

Wie zijn wij?

Onze missie is niets minder dan het herdefiniëren van wat mogelijk is. In het domein van bouwinfrastructuur staan we voor de uitdaging om effectieve afdichting, demping en bescherming tegen water te realiseren. Met een rijke geschiedenis die meer dan een eeuw beslaat, hebben we een onuitwisbare stempel gedrukt op enkele van 's werelds meest iconische bouwwerken, zoals de Oosterscheldekering en de Maeslandkering. Ons werk reikt verder dan de horizon, en we hebben een wereldwijd erfgoed van afgezonken tunnels, waaronder de Coentunnel en de Heinenoordtunnel, op onze naam staan.

We zetten ons ook in voor de ontwikkeling van geavanceerde technologieën voor offshore-windtoepassingen en omarmen hernieuwbare energie-initiatieven. Terwijl projecten steeds complexer worden, omarmen wij de uitdagingen die ermee gepaard gaan. Onze aanpak bij Trelleborg Infrastructure is niet die van een gewone leverancier, maar die van een vertrouwde en deskundige zakenpartner die duurzame, allesomvattende oplossingen levert.

De uitdaging?

Bij Trelleborg geloven we dat we samen meer kunnen bereiken. Wat is de specifieke technische uitdaging van de klant en hoe kunnen we hierop inspelen? Zijn er creatieve oplossingen die we kunnen ontwikkelen om onze status als leverancier van hoogwaardige, op maat gemaakte rubberoplossingen te behouden? En hoe vangen we dit op in een oplossing die gereed is voor overname door de productie? Vragen waar wij dagelijks mee te maken hebben en daar kom jij in beeld.

Als Design Engineer analyseer je de technische behoeften van klanten en ontwerp je een technische oplossing om hieraan te voldoen. De technische oplossingen die wij bieden zijn erop gericht om in kritische toepassingen en veeleisende omgevingen af te dichten, te bevochtigen of te beschermen met polymere (elastomeer) materialen. Samen met Sales en Productie ontwikkel je een voorstel voor de door jou ontworpen oplossing aan de klant. Tijdens het verkoopproces ben je verantwoordelijk voor de afhandeling van de technische reikwijdte, terwijl je tijdens de productiefase ervoor zorgt dat de functionaliteit van het vervaardigde product voldoet aan jouw ontwerp. Daarom is het managen van belanghebbenden voor de technische reikwijdte tijdens deze processen van cruciaal belang. Verder ondersteun je Sales met jouw technische expertise voor de continue ontwikkeling in onze marktsegmenten en signaleer je technische kansen om onze positie te versterken.

Wie ben jij?

Je bent een open, pragmatische en gestructureerde specialist. Je maakt gemakkelijk verbinding met mensen op alle niveaus en je bent cultuursensitief. Je gedijt in een omgeving waar creativiteit centraal staat en waar je vanaf het begin waarde kunt toevoegen. Als opvallende collega focus je op de hoogst mogelijke kwaliteit en ben je niet bang om de cruciale vragen te stellen om dat doel te bereiken en te blijven leren om je kennis te vergroten.

Jouw bagage

  • Technisch BSc- of MSc-diploma (civiele techniek/werktuigbouwkunde of vergelijkbaar)
  • 2- 5 jaar ervaring
  • Vloeiende beheersing van zowel de Nederlandse als Engelse taal.
  • Bereidheid en geschiktheid om (soms) te reizen naar de VS, Canada, Singapore, China en EU

Wat bieden wij?

Bij Trelleborg krijg je de kans om de prestaties van klanten te versnellen met milieuvriendelijke oplossingen. Daarnaast bieden we jou de mogelijkheid om te groeien, zowel professioneel als persoonlijk, en de gemeenschappen waarvan je deel uitmaakt te verbeteren. Verwacht een carrière pad vol passie, een concurrerend salaris en uitstekende secundaire arbeidsvoorwaarden.

Geïnteresseerd?

Solliciteer dan door je CV en motivatie te sturen via de sollicitatieknop.

 

Word een drijvende kracht achter innovatie en impact. Sluit je aan bij Trelleborg.

Jobbtitel: Automation Engineer
On-site
Plats: USA - Delano, MN
Ansök senast: 2024-03-16

Imagine leveraging your financial expertise while working for one of the leading contract manufacturers in the world. Seize this rare opportunity to be part of a healthcare and medical business unit with the support and stability of an organization that has been in business for over 100 years!

Jobbtitel: Product Engineer
On-site
Plats: USA - Fort Wayne, IN
Ansök senast: 2024-03-17

Summary of Role

The Product Engineer-1 (PE1) is a supporting role for creating custom product designs to meet customer expectations. In order to understand and support the design recommendations the PE1 will be require to interface with the TSS sales team and customer. Utilizing listening, problem solving and sales skills. In support of sales team, the PE1 may be responsible for interfacing with the Product Test Lab, Material Test Lab, and FEA specialist. In order to design a product that optimizes TSS commercial goals, the PE1 will be required to interface with SCM and manufacturing to ensure the design specifications are manufacturable in the most efficient process possible. While a PE1, the primary responsibility will be to gain experience and knowledge through exposure and training opportunities.

Tasks and Responsibilities

  • Prepare and support Rubber, Plastic and Metal component designs for internal and external manufacturing resources as a result of a Customer Request.
  • Be participant in the creation of
    • a detailed manufacturing drawing complete with dimensions and tolerances
    • support design concepts by performing Finite Element Analysis
    • ensure that the product functions in the application as specified
    • ensure that the product can be manufactured in a cost effective and reliable manner.
  • Participate in key customer visits with sales engineers and account managers.
  • Interface with suppliers/purchasing for materials, components and manufactured product.
  • Interface with suppliers on tool design and tool manufacture sources, capability and cost.
  • Responsible for identifying training opportunities from internal and external  sources for self development
  • Support Quality System accreditation

Education and Experience

  • BSMET/BSME degree or equivalent essential.
  • Proficiency in 3D CAD Package essential.
  • Proficiency with oral/written communication skills essential in the English language.
  • Project management skills essential
  • Seal design experience highly desirable
  • Elastomer/plastic processing and tooling experience highly desirable
  • Experience in the science of hydraulics and Fluid Dynamics highly desirable.

 Competencies

  • Strong mechanical and technical aptitude
  • Strong organizational skills with the ability to multi-task and manage projects with attention to detail and accuracy while meeting targeted completion dates
  • Strong customer focus and understanding of total customer satisfaction
  • Ability to work independently as well as in a team environment
  • Excellent people and relationship building skills
  • Strong analytical, decision making and problem solving skills

 

Application 

Apply Here

Please right click the link above to open in a new window

Last application date 03/16/2024

 

Jobbtitel: R&D Product Engineer Intern
On-site
Plats: USA - Fort Wayne, IN
Ansök senast: 2024-03-17

 Summary of Role: 

Summer Internship Opportunity.
The Product Engineer Intern (PEI) is responsible for supporting a Product Engineer creating custom product designs to meet customer expectations. In order to understand and support the design recommendations, the PEI will be require to interface with the TSS sales team utilizing listening, problem solving and sales skills. In support of sales team, the PEI may be responsible for interfacing with the Product Test Lab, the Material Test Lab, and or FEA specialist.
In order to design a product that optimizes TSS commercial goals, the PE will be required to interface with SCM and manufacturing to make sure that the design specifications are manufacturable in the most efficient process possible.

Tasks and Responsibilities: 

  • Support the preparation of Rubber, Plastic and Metal component designs for internal and external manufacturing resources as a result of a Customer Request.
  • A detailed manufacturing drawing complete with dimensions and tolerances
  • Interface with suppliers/purchasing for materials, components and manufactured product.
  • Interface with suppliers on tool design and tool manufacture sources, capability and cost.
  • Support Quality System accreditation

Education and Experience:

  • 2 years into BSMET/BSME degree or equivalent essential.
  • Proficiency in 3D CAD Package essential.
  • Proficiency with oral/written communication skills essential in the English language.
  • Project management skills essential
  • Elastomer/plastic processing and tooling knowledge desirable
  • Experience in the science of hydraulics and Fluid Dynamics desirable

 Competencies: 

  • Strong mechanical and technical aptitude
  • Strong organizational skills with the ability to multi-task and manage projects with attention to detail and accuracy while meeting targeted completion dates
  • Strong customer focus and understanding of total customer satisfaction
  • Ability to work independently as well as in a team environment
  • Excellent people and relationship building skills
  • Strong analytical, decision making and problem solving skills

 Application: 

Last Application Date: 2024-03-16

Apply Here 

Please right click the link to open in a new window. 

Jobbtitel: Aerospace Quality Engineer
On-site
Plats: USA - Fort Wayne, IN
Ansök senast: 2024-03-10

Summary of the Role: 

Quality Engineers have the technical ability and expertise to solve complex problems. Problems can be either technical, with regards to product quality, or commercial, regarding processes. Both types of problems need specialized abilities to determine the root cause so that they can be resolved. Many quality functions, such as auditing or PPAP/FAIR need technical training and understanding of the applicable standards. ​  

Tasks and Responsibilities: 

  • Partner with customers to understand their QA needs and provide solutions 
  • Complete customer complaints with customer and suppliers  
  • Complete plans for standard products and provide to customers and suppliers 
  • Lead and create internal and external trainings as subject matter expert 
  • Collaborate with cross-functional teams to ensure customer satisfaction 
  • Experience completing PPAP/FAI required 
  • Manage customer portals 
  • Perform and support internal AS9100 audits 
  • Partner with suppliers as needed to support inspection gaps

Education and Experience: 

  • Bachelor’s degree in engineering or other technical discipline  
  • 3 years’ experience in an engineering role, preferably customer-facing role  
  • Master’s degree counts towards 2 years’ experience 
  • 2 years’ experience in quality including experience with complex surfaces and assemblies 
  • Knowledge of aerospace processes, such as AS9100 
  • Proficiency in Microsoft Word and PowerPoint  

Competencies: 

  • Strong analytical, decision making and problem-solving skills 
  • Strong mechanical and technical aptitude 
  • Ability to self-manage and successfully work without supervision 
  • Ability to handle and prioritize dynamic workload  
  • Strong oral and written communication skills 
  • Excellent organization skills  
  • Proven proficiency with presentations and public speaking  

Travel: 

  • ​The Quality Engineer may be required to travel throughout North America and could be required to travel to Europe; estimated 10% travel. 

Application: 

Apply Here 

Please right click the link to open in a new tab 

Last Application Date 3/9/2024

As an EEO/Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran or disability status. 

 This position requires the use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR.  ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. Green Card Holder), Political Asylee or Refugee. 

Plats: MEX - Queretaro
Ansök senast: 2024-03-17

Summary of the Role:

The Application Engineer (AE) is responsible for providing technical advice and support to the sales and customer teams in order to develop, sell and successfully implement Trelleborg product, capabilities or service solutions that will meet the customer’s needs.

 

The AE will analyze the customers technical needs, incorporate the commercial needs, in order to develop proposals, with the support of Trelleborg factory and engineering support groups, outlining how the organization’s products and services can meet these needs and be integrated and implemented with the customers new and existing systems and equipment.

Tasks and Responsibilities: 

The primary function of the Application Engineer (AE) position is to provide technical advice and proposals to the sales team and customer team in order to develop, sell and successfully implement the Trelleborg product, capabilities and service solutions.

  • Collect and analyze information from customers to understand their business and their technical needs and expectations.
  • Develop technical proposals to show how Trelleborg’s products and services can meet customer needs and be integrated and implemented with the customers existing systems and equipment and/or suggest changes needed in order to integrate the solution.
  • Develop and deliver technical sales presentations and respond to technical questions regarding Trelleborg's products, services, and capabilities.
  • Create or edit existing Trelleborg or Customer prints thru the use of NX, Adobe Pro, and other image editing software
  • Manage technical prints and documents, routing and storage, by utilizing Teamcenter.
  • Coordinate cross-functionally to ensure the proper solutions are offered. Including, Trelleborg factories, SCM and 3rd party factory engineers, Trelleborg R&D test labs and Central Product Engineering, Product Managers, and Segment Managers.
  • Respond to customers questions and troubleshoot, investigate, and resolve technical problems that arise during or after implementation of Trelleborg solutions.
  • Identify value propositions for solution and be able to transition and explain customer value.
  • Assist in achieving Sales Growth target and Profitability Goals
  • Process and manage engineering projects in a timely manner with a focus on project cycle velocity and project conversion.
  • Understand and incorporate the commercial aspects (target budget/sales price) of the project when developing and providing proposals and solutions to meet customer needs.
  • Visit existing and new strategic customers with the focus being Total Customer Satisfaction and Generation and Conversion of Projects for Sales Growth.
  • Build customer relationships and strategic partnerships, assess customer needs and recommend appropriate product and service solutions; respond to complex customer inquiries. Utilize Trelleborg resources where appropriate and needed.
  • Provide market feedback and intelligence for use by sales team, Marketing Department, Segment/Product/Lead Group personnel
  • Promote standard products, and custom engineered products and/or services where needed. Be a total solution provider.
  • Perform in-house product and technical trainings.
  • Article number creation and set up
  • Complete KPI reporting and submit the first week of each Month. Including but not limited to: EAR projects, Project win rates, Project cycle and velocity, competitor activity, and changing market conditions.
  • Learn and utilize internal processes: CRM, JDE, GPS, Consense, Quality, ISO.
  • Submit quote requests through supply chain for new opportunities to aid the Sales Engineer in receiving costing in a timely manner.
  • Ensure full compliance with all Standard Operating Procedures including Quality Manual and Quality Procedures.
  • Represent Industrial Americas and region in cross-functional teams and projects.
  • Provide innovative solutions and continuous improvements
  • Maintain a professional attitude and appearance at all times when dealing with customers.

 

Education and Experience:

  • Minimum 1 to 3 year of work experience in engineering related field
  • Minimum of 4 Year College Engineering degree. (Mechanical or Technical preferred)
  • Strong understanding of technical prints and terminology.
  • Strong knowledge of mechanical systems.
  • Knowledge of rubber/plastic products, seals and bearings is beneficial
  • Application knowledge within specified market segments such as Fluid Power, Life Sciences, Food, Bev, Water, Off-Highway/Construction, Automotive, and Aerospace is beneficial
  • Familiarity with ISO quality requirements is beneficial

 

Competencies: 

  • Strong mechanical and technical aptitude
  • Proven proficiency and capabilities with 3D solid modeling software
  • Strong organizational skills with the ability to multi-task and manage projects with attention to detail and accuracy
  • Strong customer focus and understanding of total customer satisfaction
  • Strong understanding of the commercial side of the business and how it affects business decisions and solutions
  • Ability to work independently as well as in a team environment
  • Excellent written and verbal communication skills
  • Excellent people and relationship building skills
  • Customer driven with a positive, professional, can-do attitude
  • Strong analytical, decision making and problem solving skills

 

Travel: 

  • The AE position is a local geographic position.
  • Travel requirements (including overnight travel) will be approximately 35% of work time. Travel will include local, national and international requirements for customer visits, business meetings, and trainings.

Application: 

Last Application Date: 3/16/2024

Apply Here

Please right-click the link to open in new tab

Jobbtitel: Process Engineer (m/f/d)
Hybrid
Plats: ITA - Pianezza
Ansök senast: 2024-03-30

The Process Engineer will coordinate the Rotary Oil Seal Process Development Center and will be responsible for the identification, development and validation of innovative manufacturing processes, in cooperation with product and process engineers of several manufacturing units located worldwide. This role will drive the process innovation by scouting innovative technologies, planning and executing the testing and validation activities and he will report on the achievements. The Process Engineer will be also coordinating all necessary activities for the production of  prototypes required by the end customers and by the internal R&D centers.

Scope of your role

  • Foresee and scout new market opportunities of development in the ROS manufacturing process
  • Liaise with R&D centers and other Process Development Centers within TSS
  • Project management of the new ROS process development projects launched
  • Set-up  design of experiment and testing plan for the new processes under test and validation
  • Liaise with equipment suppliers, tool makers and internal departments by specifying, sourcing, procuring raw materials
  • Coordination of activities and tests needed to setup and validation of new tooling
  • Coordination of manufacturing of new ROS samples required by internal R&D or by end customers
  • Ensure strict documentation at all stages of the project

What defines you

  • Minimum bachelor in engineering educational level
  • Preferred previous experience in manufacturing and/or process development role
  • Technical background on synthetic rubbers ad their molding techniques is preferred
  • Project management skills
  • Ability to work under own initiative
  • International travel availability
  • Fluent in English and Italian language
  • Good practice with MS Office tools

Our benefits for you

  • Modern multicultural work environment 
  • Several weeks of induction training for your new tasks: You will get to know our company, your contacts, and our structures
  • A challenging, multifaceted, and interdisciplinary field of activity
  • Extensive product training 
  • Flexible office hours with remote work opportunities

Start shaping industry from the inside! 

Please send us your CV in English. 

Jobbtitel: Aerospace Application Engineer
On-site
Plats: USA - Chalfont, PA
Ansök senast: 2024-03-10

Summary of the Role:

As an Aerospace Application Engineer (AE) at Trelleborg, you will be responsible for providing technical support and expertise to our customers in the aerospace industry. Our aerospace group at Trelleborg provides customers with innovative polymer solutions for applications ranging from airframe & engine to interiors. In this role, you will work with customers to understand their technical needs and provide solutions, collaborate with cross-functional teams such as R&D, manufacturing, and sales to ensure customer satisfaction. This role requires a strong background in engineering and a passion for problem-solving.

Tasks and Responsibilities:

  • Partner with customers to understand their intermediate technical needs and provide solutions  
  • Provide technical support and troubleshooting for customers 
  • Complete intermediate preliminary design reviews for new business opportunities 
  • Complete intermediate critical design reviews for new product development 
  • Create and maintain engineering documentation (models, drawings, and procedures) 
  • Support the sales team by providing technical information and product demonstrations 
  • Process engineering change requests internally and externally 
  • Collaborate with cross-functional teams to ensure customer satisfaction (e.g., R&D, manufacturing, sales)  
  • Engineering approver for engineering documentation reviews 
  • Partner with 3rd party suppliers as needed to support product gaps

Education and Experience: 

  • Bachelor's degree in engineering or other technical discipline 
  • 3 years of experience in an engineering role, preferably in a customer-facing role 
  • with a Master's degree counting as 2 years of experience 
  • 2 years’ experience with CAD and engineering software (e.g., CATIA, SolidWorks, or NX) 
  • 2 years’ experience in product design, including experience with complex surfaces, assemblies, and kinematics 
  • Proficiency in Microsoft Word and PowerPoint 

Competencies: 

  • Strong analytical, decision making and problem-solving skills 
  • Strong mechanical and technical aptitude 
  • Ability to self-manage and successfully work without supervision 
  • Ability to handle and prioritize dynamic workload 
  • Strong oral and written communication 
  • Excellent organizational skills 
  • Proven proficiency with presentations and public speaking

Travel: 

  • 40% domestic and international

Application: 

Apply Here 

Please right click the link to open in a new tab 

Last Application Date 3/9/2024​

As an EEO/Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran or disability status.

This position requires the use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR.  ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. Green Card Holder), Political Asylee or Refugee.

 

Plats: FRA - Maisons-Laffitte
Ansök senast: 2024-03-30

To support our Trelleborg Sealing Solutions, the CSC team in Maisons-Laffitte (France), we are looking for you as an Application Engineer.

Scope of your role

  • Engineering support for managed accounts in order to develop sealing solutions, considering technical and economic aspects
  • Point of contact for the customer (design or R&D) for all technical questions with the aim of building a multilevel network with the customer
  • Close contact and alignment with other BU´s (e.g., manufacturing sites, R&D, SCM..)
  • Fully understand the customer's applications and explain the benefits of our sealing portfolio with their excellent technical skills and customized solutions (application-specific material compounds, quality-related requirements, etc.)
  • Initiate RFQ, as well as manage technical complaints and material compliance. Realization of customer opportunities
  • Provide market feedback to identify innovation trends in order to further improve our sealing portfolio
  • Perform product and technical trainings
  • Support preparation of and/or participate in customer visits and fairs
  • Sealing evaluation to provide suggestions for improvements to customers' application
  • Article data management and perform industrialization of design solutions (quality planning, item creation non-standard, etc.)
  • Approve technical drawings, customer specifications and documentation, start the process for routing and storage in alignment with all involved parties
  • Further tasks according to the RACI Matrix and sales processes in IMS

Your Qualifications

  • Degree in Engineering, Mechanical, Material Technology or equivalent qualifications 
  • Project Management skills with proven ability to manage multiple concurrent projects
  • Experience in sealing technology is an advantage  
  • Good understanding of IT systems (CRM, ERP, etc.)
  • Independent working approach with a strong drive to deliver quality solutions 
  • Fluent in English and French (verbal and written)

Our benefits for you

  • Modern multicultural work environment 
  • Extensive product training 
  • Very good traffic connections and services (Office in front of RER A train line station)
  • Flexible work hours with the possibility to have 2 days of home working per week maximum

#Start shaping industry from the inside#

Trelleborg is an Equal Opportunity Employer, and we take pride in the diversity of our employees, valuing the special experience and expertise that people from different backgrounds bring to our business. The ability to develop ground-breaking technologies is one of our key assets and our people make it happen.

Plats: IND - Ahmedabad

Trelleborg Marine Systems is looking for a Trainee Design engineer to enhance the innovation in the field. A candidate looking to learn & grow with the company may apply.